FixVault
Home › Pontiac › 2004 › GTO Automatic › Repair and Diagnosis › Engine Performance › System › Engine Controls -- 5.7L -- (Introduction) › Repair Instructions › Fuel Tank Pressure Sensor Replacement › Removal Procedure

Removal Procedure

  1. Remove the fuel tank assembly. Refer to Fuel Tank Replacement .
  2. Remove the modular fuel pump and sender assembly from the fuel tank. Refer to Fuel Sender Assembly Replacement .
    IMPORTANT: Do not pull or lever the fuel tank pressure sensor out from the connector end as damage may occur to the sensor body.
    3. Fig 1: View Of Fuel Tank Pressure Sensor
    GM1372263Courtesy of GENERAL MOTORS CORP.
  3. Remove the fuel tank pressure sensor (2) from the sender assembly cover (1).
About FixVault