FixVault
Home › Pontiac › 2004 › GTO Automatic › Repair and Diagnosis › Restraints › Restraints Control Systems › Seat Belt System › Repair Instructions › Seat Belt Replacement - Rear › Installation Procedure

Installation Procedure

    NOTE: Refer to Fastener Notice in Cautions and Notices.
    Fig 1: View Of Rear Seat Belt Retractor
    GM1353840Courtesy of GENERAL MOTORS CORP.
  1. Install the rear seat belt retractor (1) to the vehicle. Secure the retractor with the mounting bolt (2).

    Tighten:  Tighten the rear seat belt retractor bolt to 42.5 N.m (31 lb ft).

    2. Fig 2: View Of Rear Seat Belt Upper Guide Assembly
    GM1353839Courtesy of GENERAL MOTORS CORP.
  2. Install the rear seat belt upper guide bolt (4), wave washer (2) and seat belt spacer (1).

    Tighten:  Tighten the rear seat belt upper guide bolt to 42.5 N.m (31 lb ft).

  3. Install the upper quarter trim panel. Refer to Trim Panel Replacement - Rear Quarter Upper in Interior Trim.
    4. Fig 3: View Of Rear Seat Belt Anchor Bolt
    GM1353838Courtesy of GENERAL MOTORS CORP.
  4. Install the rear seat belt anchor bolt (1).

    Tighten:  Tighten the rear seat belt anchor bolt to 42.5 N.m (31 lb ft).

  5. Install the rear seat back. Refer to Seat Back Replacement - Rear in Seats.
  6. Install the rear seat cushion. Refer to Seat Cushion Replacement - Rear in Seats.
About FixVault