FixVault
Home › Pontiac › 2004 › GTO Standard › Repair and Diagnosis › Body & Frame › Frames, Subframes & Crossmembers › Frame And Underbody › Repair Instructions › Engine Protection Shield Replacement › Installation Procedure

Installation Procedure

    NOTE: Refer to Fastener Notice in Cautions and Notices.
  1. Install engine protection shield, and secure with the four engine protection shield bolts (1).

    Tighten:  Tighten the engine protection shield bolts to 30 N.m (22 lb ft).

  2. Lower the vehicle. Refer to Lifting and Jacking the Vehicle in General Information.
    3. Fig 1: View Of Engine Protection Shield Bolts
    GM1302128Courtesy of GENERAL MOTORS CORP.
About FixVault