FixVault
Home › Pontiac › 2004 › GTO Standard › Repair and Diagnosis › Body & Frame › Frames, Subframes & Crossmembers › Frame And Underbody › Repair Instructions › Engine Protection Shield Replacement › Removal Procedure

Removal Procedure

  1. Raise and support vehicle. Refer to Lifting and Jacking the Vehicle in General Information.
  2. Remove four engine protection shield bolts (1), then the engine protection shield.
    3. Fig 1: View Of Engine Protection Shield Bolts
    GM1302128Courtesy of GENERAL MOTORS CORP.
About FixVault