Installation Procedure

Fig 1: View Of Release Lever

Courtesy of GENERAL MOTORS CORP.

Push inward on the seat back release lever (1) ensuring the lever snaps into release lever retaining clip.

Fig 2: View Of Inner, Lower J-Clips & Velcro Tabs

Courtesy of GENERAL MOTORS CORP.

Engage the seat back cover J-clips (1) and the Velcro tabs (2) at the lower corners.
Install the front seat back panel. Refer to Seat Back Panel Replacement - Front .

NOTE: Refer to Fastener Notice in Cautions and Notices.

Fig 3: View Of Seat Back Latch Retaining Screw

Courtesy of GENERAL MOTORS CORP.

Install the seat back latch to seat back frame retaining screw (1).
Tighten: Tighten the seat back latch retaining screw to 2 N.m (18 lb in).