FixVault
Home › Pontiac › 2004 › GTO Standard › Repair and Diagnosis › Engine Performance › System › Engine Controls -- 5.7L -- (Introduction) › Repair Instructions › Camshaft Position (CMP) Sensor Replacement › Removal Procedure

Removal Procedure

  1. Disconnect the negative battery cable. Refer to Battery Negative Cable Disconnect/Connect Procedure in Engine Electrical.
  2. Remove the intake manifold. Refer to Intake Manifold Replacement in Engine Mechanical 5.7L.
  3. Remove the Camshaft Position (CMP) sensor electrical connector.
    IMPORTANT: Clean the area around the CMP before removal in order to avoid debris from entering the engine.
  4. Remove the CMP sensor retaining bolt.
    Fig 1: View Of CMP Sensor
    GM55308Courtesy of GENERAL MOTORS CORP.
  5. Remove the CMP sensor.
About FixVault