FixVault
Home › Pontiac › 2004 › Grand Prix GTP › Repair and Diagnosis › Brakes › Antilock Brake System, Traction Control System & Stability Control System › Repair Instructions › Brake Pressure Modulator Valve (BPMV) Bracket Replacement › Installation Procedure

Installation Procedure

  1. Install the BPMV bracket (4) to the wheel house.
    2. NOTE: Refer to Fastener Notice in Cautions and Notices.
  2. Install the 3 BPMV bracket nuts (1) (2) and (3) to the studs on the BPMV bracket (4).

    Tighten:  Tighten the 3 BPMV bracket nuts to 10 N.m (7 lb ft).

    3. Fig 1: View Of BPMV Bracket Nuts
    GM230411Courtesy of GENERAL MOTORS CORP.
  3. Install the BPMV and EBCM as an assembly to the BPMV bracket. Refer to Brake Pressure Modulator Valve (BPMV) Replacement .
  4. Turn the ignition switch to the RUN position.
  5. Perform the Diagnostic System Check - ABS .
About FixVault