FixVault
Home › Pontiac › 2004 › Grand Prix GTP › Repair and Diagnosis › Engine Performance › System › Engine Controls (Introduction) - 3.8L › Repair Instructions › Barometric Pressure (BARO) Sensor Replacement › Installation Procedure

Installation Procedure

  1. Install the BARO sensor.
  2. Install the BARO sensor retainer.
    3. Fig 1: Locating MAP & BARO Sensors
    GM1210599Courtesy of GENERAL MOTORS CORP.
  3. Connect the BARO sensor electrical connector.
  4. Install the fuel injector sight shield. Refer to Fuel Injector Sight Shield Replacement (L26) or Fuel Injector Sight Shield Replacement (L32) in Engine Mechanical - 3.8L.
About FixVault