FixVault
Home › Pontiac › 2004 › Sunfire Automatic › Repair and Diagnosis (Single Page) › Body & Frame › Sun Roof/T-Top/Convertible Top › Sunroof System › Repair Instructions › Sunroof Control Module Replacement › Installation Procedure

Installation Procedure

  1. Connect the wire harness connectors to the power sunroof control module (2).
  2. Engage the power sunroof control module retainers by sliding the control module (2) towards the left side of the vehicle.
  3. Install the tie wraps to secure the power sunroof control module wire harness to the drive and return tubes.
  4. Install the headliner. Refer to Headliner Replacement in Interior Trim.
    Fig 1: Connecting Sunroof Motor/Actuator Wiring Harness
    GM750809Courtesy of GENERAL MOTORS CORP.
About FixVault