FixVault
Home › Pontiac › 2004 › Sunfire Automatic › Repair and Diagnosis › Steering › Steering Wheel & Steering Column › Repair Instructions › Multifunction, Turn Signal Switch Replacement › Removal Procedure

Removal Procedure

CAUTION: Refer to BATTERY DISCONNECT CAUTION in Cautions and Notices.
  1. Disconnect the negative battery cable.
  2. Remove the steering column trim covers. Refer to Steering Column Trim Covers Replacement .
  3. Remove the retaining screws from the multifunction switch (2).
  4. Remove the multifunction switch (2) from the steering column.
  5. Disconnect the electrical connectors from the multifunction switch (2).
    Fig 1: Exploded View Of Multifunction, Tilt Lever & Turn Signal Switch
    GM307332Courtesy of GENERAL MOTORS CORP.
About FixVault