Assembly Procedure

Install the coil spring and upper strut mount to the J 45400 .

Fig 1: View Of Compressor Forcing Screw & Coil Spring
Courtesy of GENERAL MOTORS CORP.
Turn the spring compressor forcing screw (1) until the coil spring is compressed.
Install the strut to the coil spring and upper strut mount.
Loosely install the strut retaining nut.
NOTE: Refer to Fastener Notice in Cautions and Notices.
Use a 45 TORX® socket in order to hold the strut shaft. Use a strut rod socket or equivalent to Install the upper strut mount nut.
Tighten: Tighten the strut mount nut to 75 N.m (55 lb ft).

Fig 2: Removing/Installing Strut Retaining Nut
Courtesy of GENERAL MOTORS CORP.
Remove the strut from the J 45400 .
Install the strut to the vehicle. Refer to Strut Assembly Replacement .