FixVault
Home › Pontiac › 2004 › Vibe Base, AWD › Repair and Diagnosis › Brakes › Traction Control › Antilock Brake System › Repair Instructions › Deceleration Sensor Replacement › Removal Procedure

Removal Procedure

  1. Remove the LH front seat. Refer to Seat Replacement - Front Bucket in Seats.
    2. Fig 1: Deceleration Sensor Bracket And Bolt
    GM839796Courtesy of GENERAL MOTORS CORP.
  2. Remove the bolt (1) and the upper deceleration sensor bracket (2).
  3. Disconnect the deceleration sensor electrical connector.
    4. Fig 2: Deceleration Sensor And Bolts
    GM839809Courtesy of GENERAL MOTORS CORP.
  4. Remove the two bolts (1) that retain the deceleration sensor (2).
  5. Remove the deceleration sensor (2) from the vehicle.
About FixVault