FixVault
Home › Pontiac › 2004 › Vibe Base, AWD › Repair and Diagnosis › Electrical › Body Electrical › Accessory Power Socket › Repair Instructions › Power Outlet Receptacle Switch Replacement › Removal Procedure

Removal Procedure

    Fig 1: Accessory Power Receptacle Bezel Components
    GM853104Courtesy of GENERAL MOTORS CORP.
  1. Disconnect the negative battery cable. Refer to Battery Negative Cable Disconnect/Connect Procedure in Engine Electrical.
  2. Using a flat bladed tool, disengage the 3 upper clips (1) and the 2 lower clips (4) on the accessory power receptacle switch bezel (3).
  3. Disconnect the electrical connector.
    4. Fig 2: Accessory Power Receptacle Clips
    GM853276Courtesy of GENERAL MOTORS CORP.
  4. Disengage the 2 clips (1) on the accessory power receptacle switch (2).
    5. Fig 3: Accessory Power Receptacle Bezel Components
    GM853104Courtesy of GENERAL MOTORS CORP.
  5. Remove the accessory power receptacle switch (5) from the bezel (3).
About FixVault