FixVault
Home › Pontiac › 2004 › Vibe Base, AWD › Repair and Diagnosis › Engine Performance › System › Engine Control System (Introduction) - 1.8L (LV6) › Repair Instructions › Fuel Pressure Regulator Replacement (AWD) › Removal Procedure

Removal Procedure

    Fig 1: Removing Fuel Pressure Regulator, Lower Cushion And Bottom Cap (AWD)
    GM833910Courtesy of GENERAL MOTORS CORP.
  1. Remove the fuel sender assembly. Refer to Fuel Sender Assembly Replacement (FWD)  or Fuel Sender Assembly Replacement (AWD) .
  2. Remove the bottom cap (2) and the lower cushion (3) from the fuel sender assembly.
  3. Remove the fuel pressure regulator (1).
About FixVault