FixVault
Home › Pontiac › 2004 › Vibe Base, AWD › Repair and Diagnosis › External Pages › Different car › Section 65 (Disc Brake System) › Repair Instructions › Disc Brake Hardware Replacement › Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2004 Pontiac Sunfire and 2004 Chevrolet Cavalier. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the disc brake pads. Refer to Brake Pads Replacement .
  2. Remove the disc brake caliper bolts (1) from the caliper assembly.
  3. Remove the caliper bushings (2) from the brake caliper assembly, and discard the bushings.
    Fig 1: Exploded View Of Disc Brake Caliper Bushings
    GM927125Courtesy of GENERAL MOTORS CORP.
  4. Inspect the caliper bushing bores in the caliper assembly. Remove any debris or corrosion from the bores.
  5. Inspect the bolts for rust, corrosion, and/or damage. If any of these conditions are present, replace the bolts.
About FixVault