Installation Procedure

WARNING: This page is about a different car, the 2005 Pontiac Vibe. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Removing/Installing Headliner

Courtesy of GENERAL MOTORS CORP.

Install the roof rail module (1).

NOTE: Refer to FASTENER NOTICE in Cautions and Notices.

Install the roof rail module bolts (4) in sequence shown.
Tighten: Tighten the roof rail module mounting bolts to 9.8 N.m (7 lb ft).
Install the 6 roof rail module screws (3).
Install the roof rail module clip (2).
Install the roof rail module electrical connector.
Install the headliner. Refer to Headliner Replacement in Interior Trim.
Enable the SIR system. Refer to SIR Disabling and Enabling Zone 2 .