FixVault
Home › Pontiac › 2004 › Vibe Base, AWD › Repair and Diagnosis › Steering › Power Steering System › Repair Instructions › Power Steering Pressure Switch Replacement › Removal Procedure

Removal Procedure

  1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle in General Information.
  2. Remove the right front tire and wheel assembly. Refer to Tire and Wheel Removal and Installation in Tires and Wheels.
  3. Remove the right front engine splash shield. Refer to Splash Shield Replacement - Engine - Right in Body Front End.
    4. Fig 1: Power Steering Pump Components
    GM820256Courtesy of GENERAL MOTORS CORP.
  4. Disconnect the power steering pressure (PSP) switch connector (3).
  5. Remove the PSP switch from the pump.
About FixVault