FixVault
Home › Pontiac › 2004 › Vibe Base, FWD, Standard › Repair and Diagnosis (Single Page) › Electrical › Instrument Panel System Displays, Gauges And Console › Repair Instructions › Multifunction Alarm Module Replacement › Installation Procedure

Installation Procedure

    Fig 1: Multifunction Alarm Module And Junction Block
    GM432041Courtesy of GENERAL MOTORS CORP.
  1. Install the multifunction alarm module (1) to the rear of the junction block (2).
  2. Connect the multifunction alarm module electrical connector.
  3. Reposition the junction block back into position. Secure the junction block with the screws.
  4. Connect the negative battery cable.
About FixVault