Installation Procedure

Fig 1: CMP Electrical Connector And CMP Sensor

Courtesy of GENERAL MOTORS CORP.

NOTE: Refer to Fastener Notice in Cautions and Notices.

Install the two CMP sensor hold-down bolts.
Tighten: Tighten the hold-down bolts to 9 N.m (80 lb in).
Connect the electrical connector (1) to the CMP sensor.

Fig 2: View Of Engine Upper Cover

Courtesy of GENERAL MOTORS CORP.

Install the engine cover (1) to the engine.
Secure the engine cover (1) with the four fasteners.
Tighten: Tighten the fasteners to 7 N.m (62 lb in).