FixVault
Home › Pontiac › 2005 › Aztek Base, AWD › Repair and Diagnosis › Accessories & Equipment › Communication Devices › Computer/Integrating Systems › Repair Instructions › Data Link Connector Replacement › Installation Procedure

Installation Procedure

    Fig 1: View Of Data Link Connector Retaining Bolts/Screws
    GM386625Courtesy of GENERAL MOTORS CORP.
  1. Place the data link connector into position.
    2. NOTE: Refer to Fastener Notice in Cautions and Notices.
  2. Install the bolts/screws to the data link connector.

    Tighten:  Tighten the bolts/screws to 2 N.m (18 lb in).

About FixVault