FixVault
Home › Pontiac › 2005 › Aztek Base, AWD › Repair and Diagnosis › Accessories & Equipment › Wiper/Washer Systems › Wiper System & Washer System › Repair Instructions › Washer Solvent Container Level Sensor Replacement › Removal Procedure

Removal Procedure

  1. Open the hood.
  2. Drain the washer solvent from the washer solvent container.
    3. Fig 1: View Of Washer Solvent Container Level Sensor Electrical Connector
    GM774666Courtesy of GENERAL MOTORS CORP.
  3. Disconnect the washer solvent container level sensor electrical connector.
    4. Fig 2: Identifying Washer Solvent Container Level Sensor & Seal
    GM735845Courtesy of GENERAL MOTORS CORP.
  4. Using a small flat-bladed tool, remove the washer solvent container level sensor and seal from the washer solvent container.
About FixVault