FixVault
Home › Pontiac › 2005 › Aztek Base, AWD › Repair and Diagnosis › Body & Frame › Seats › Seat System › Repair Instructions › Lumbar Adjuster Support Replacement - Manual › Installation Procedure

Installation Procedure

    Fig 1: Locating Lumbar Control Screws
    GM627459Courtesy of GENERAL MOTORS CORP.
  1. Install the lumbar control to the seat cushion frame.
    2. NOTE: Refer to Fastener Notice in Cautions and Notices.
  2. Install the screws to the lumbar control.

    Tighten:  Tighten the screws to 10 N.m (89 lb in).

    3. Fig 2: Identifying Lumbar Control Cable
    GM627458Courtesy of GENERAL MOTORS CORP.
  3. Install the lumbar control cable to the lumbar control.
  4. Install the outer trim panel. Refer to Seat Cushion Outer Trim Panel Replacement - Front Seat .
  5. Install the front bucket seat. Refer to Seat Replacement - Bucket .
About FixVault