FixVault
Home › Pontiac › 2005 › Aztek Base, AWD › Repair and Diagnosis › Body & Frame › Seats › Seat System › Repair Instructions › Seat Replacement - Bucket › Installation Procedure

Installation Procedure

    Fig 1: Identifying Front Seat Adjuster Nuts
    GM630841Courtesy of GENERAL MOTORS CORP.
  1. Install the front seat to the studs on the floor pan.
  2. Connect the seat electrical connectors.
    3. NOTE: Refer to Fastener Notice in Cautions and Notices.
  3. Install the nuts to the seat floor pan studs.

    Tighten:  Tighten the front bucket seat adjuster-to-floor pan nuts to 50 N.m (37 lb ft).

    Inspect the front bucket seat for proper operation and adjustment.

  4. Enable the SIR system. Refer to SIR Disabling and Enabling Zone 7 or SIR Disabling and Enabling Zone 9 .

About FixVault