FixVault
Home › Pontiac › 2005 › Aztek Base, AWD › Repair and Diagnosis › External Pages › Different car › Section 104 (Shift Interlock System) › Repair Instructions › Automatic Transmission Shift Lock Actuator Replacement › Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2004 Pontiac Grand Prix. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Automatic Transaxle Shift Lock Actuator Electrical Connector
    GM1218843Courtesy of GENERAL MOTORS CORP.
  1. Install both ends of the automatic transaxle shift lock actuator to the pivot points.
  2. Connect the automatic transaxle shift lock actuator electrical connector (1).
  3. Install the center console. Refer to Console Replacement - Front Floor in Instrument Panel, Gages and Console.
  4. Connect the negative battery cable. Refer to Battery Negative Cable Disconnect/Connect Procedure in Engine Electrical.
About FixVault