FixVault

Installation Procedure

WARNING: This page is about a different car, the 2004 Pontiac Grand Prix. However, it is still accessible from the selected car via links, so may be relevant.
  1. Position the washer hose to the vehicle.
  2. Fig 1: Windshield Washer Hose & Air Inlet Grille Panel
    GM815215Courtesy of GENERAL MOTORS CORP.
  3. Route the washer pump hose down along side the right front inner fender and into the front inner fender area.
  4. Connect the washer hose to the air inlet grille panel.
  5. Connect the washer hose to the wiper arms.
  6. Fig 2: Windshield Washer Hose & Wiper Arms
    GM815210Courtesy of GENERAL MOTORS CORP.
  7. Raise the vehicle.
  8. Fig 3: Windshield Washer Hose & Washer Pump
    GM815217Courtesy of GENERAL MOTORS CORP.
  9. Connect the washer hose to the washer pump.
  10. Install the right front fender liner. Refer to Front Fender Liner Replacement in Body Front End.
  11. Close the hood.