FixVault
Home › Pontiac › 2005 › Aztek Base, AWD › Repair and Diagnosis › External Pages › Different car › Section 117 (Front Suspension System) › Repair Instructions › Stabilizer Shaft Insulator Replacement › Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2004 Pontiac Grand Prix. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Left & Right Side Stabilizer Shaft Insulators
    GM1208424Courtesy of GENERAL MOTORS CORP.
  1. Install the left and right side stabilizer shaft insulators (1) to the stabilizer shaft (2).
    2. Fig 2: Left & Right Side Stabilizer Shaft Insulator Clamp Bolts
    GM1208422Courtesy of GENERAL MOTORS CORP.
  2. Install the left and right side stabilizer shaft insulator clamps.
    3. NOTE: Refer to Fastener Notice in Cautions and Notices.
  3. Install the left and right side stabilizer shaft insulator clamp bolts.

    Tighten:  Tighten the bolts to 30 N.m (22 lb in).

  4. Lower the vehicle.
About FixVault