Removal Procedure

WARNING: This page is about a different car, the 2004 Pontiac Grand Prix. However, it is still accessible from the selected car via links, so may be relevant.

Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle in General Information.
Remove the bearing/hub assembly. Refer to Wheel Bearing/Hub Replacement - Front .
Disconnect the front lower control arm ball stud. Refer to Lower Control Arm Replacement .
Disconnect the outer tie rod end from the steering knuckle. Refer to Rack and Pinion Outer Tie Rod End Replacement in Power Steering System.

Fig 1: Scribing Strut To Knuckle

Courtesy of GENERAL MOTORS CORP.

Scribe the strut to the knuckle.

Fig 2: View Of Steering Knuckle To Strut Bolts

Courtesy of GENERAL MOTORS CORP.

Remove the bolts and nuts attaching the strut to the knuckle.
Remove the knuckle from the vehicle.