FixVault
Home › Pontiac › 2005 › Aztek Base, AWD › Repair and Diagnosis › External Pages › Different car › Section 14 (Cruise Control System) › Repair Instructions › Cruise Control Cable Replacement (3.4L) › Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2004 Chevrolet Monte Carlo and 2004 Chevrolet Impala. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the cruise control from the throttle body lever and the accelerator control cable bracket.
    2. Fig 1: Cruise Control & Accelerator Control Cable Bracket (3.4L)
    GM329490Courtesy of GENERAL MOTORS CORP.
  2. Remove the cruise control cable from the cruise control cable retainers.
  3. Remove the cruise control cable from the module strap.
    4. Fig 2: Cruise Control Cable & Module Strap
    GM301717Courtesy of GENERAL MOTORS CORP.
  4. Remove the cruise control cable from the cruise control module by rotating the cruise control cable counterclockwise.
  5. Remove the cruise control cable.
    6. Fig 3: Cruise Control Module & Cable
    GM301671Courtesy of GENERAL MOTORS CORP.
About FixVault