FixVault
Home › Pontiac › 2005 › Aztek Base, AWD › Repair and Diagnosis › External Pages › Different car › Section 14 (Cruise Control System) › Repair Instructions › Cruise Release Switch Replacement › Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2004 Chevrolet Monte Carlo and 2004 Chevrolet Impala. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the left instrument panel insulator. Refer to Closeout/Insulator Panel Replacement - Left in Instrument Panel, Gages and Console.
  2. Disconnect the cruise release switch electrical connector.
    3. Fig 1: Cruise Release Switch Electrical Connector
    GM319440Courtesy of GENERAL MOTORS CORP.
  3. Remove the cruise release switch from the cruise release switch retainer on the brake pedal bracket.
About FixVault