FixVault
Home › Pontiac › 2005 › Aztek Base, AWD › Repair and Diagnosis › External Pages › Different car › Section 20 (Engine Control System 3.8L (Introduction)) › Repair Instructions › Air Cleaner Element Replacement › Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2004 Chevrolet Monte Carlo and 2004 Chevrolet Impala. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the air cleaner intake duct. Refer to Air Cleaner Intake Duct Replacement .
  2. Unclip the 2 air cleaner cover retaining clamps.
  3. Remove the air cleaner housing cover (5).
  4. Remove the air filter element (6).
  5. Inspect the air cleaner housing cover (5), the seal assembly, and the air cleaner intake duct for damage. If a problem is found, replace as necessary.
    6. Fig 1: Air Cleaner Components
    GM444460Courtesy of GENERAL MOTORS CORP.
About FixVault