FixVault
Home › Pontiac › 2005 › Aztek Base, AWD › Repair and Diagnosis › External Pages › Different car › Section 20 (Engine Control System 3.8L (Introduction)) › Repair Instructions › Throttle Body Air Inlet Screen Replacement › Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2004 Chevrolet Monte Carlo and 2004 Chevrolet Impala. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the air cleaner intake duct. Refer to Air Cleaner Intake Duct Replacement .
  2. Remove the snap ring (3).
  3. Remove the throttle body air inlet screen (2).
    4. Fig 1: Removing Throttle Body Air Inlet Screen
    GM180140Courtesy of GENERAL MOTORS CORP.
About FixVault