FixVault
Home › Pontiac › 2005 › Aztek Base, AWD › Repair and Diagnosis › External Pages › Different car › Section 24 (Seat System) › Repair Instructions › Seat Switch Replacement - Power › Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2004 Chevrolet Monte Carlo and 2004 Chevrolet Impala. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the front seat cushion outer trim panel. Refer to Trim Panel Replacement - Front Seat .
  2. Remove the power front seat switch from the front seat outer trim panel, using a small flat bladed tool.
    3. Fig 1: Removing Power Front Seat Switch
    GM522213Courtesy of GENERAL MOTORS CORP.
  3. Disconnect the electrical connector from the power front seat switch.
    4. Fig 2: Power Front Seat Switch Electrical Connector
    GM522226Courtesy of GENERAL MOTORS CORP.
  4. Remove the power front seat switch from the vehicle.
About FixVault