FixVault
Home › Pontiac › 2005 › Aztek Base, AWD › Repair and Diagnosis › External Pages › Different car › Section 32 (Body Front End) › Repair Instructions › Plenum Chamber Water Deflector Replacement › Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2004 Chevrolet Monte Carlo and 2004 Chevrolet Impala. However, it is still accessible from the selected car via links, so may be relevant.
  1. Open the hood.
  2. Remove the right side of the air inlet grille. Refer to Air Inlet Grille Panel Replacement .
  3. Remove the plenum chamber deflector from the pinch-weld flange, by lifting up and out.
    4. Fig 1: Plenum Chamber Water Deflector
    GM456717Courtesy of GENERAL MOTORS CORP.
About FixVault