Installation Procedure

WARNING: This page is about a different car, the 2004 Chevrolet Monte Carlo and 2004 Chevrolet Impala. However, it is still accessible from the selected car via links, so may be relevant.

Position the wiper motor cover to the wiper motor.

Fig 1: Wiper Motor Cover

Courtesy of GENERAL MOTORS CORP.

NOTE: Refer toFastener Notice in Cautions and Notices.

Install the wiper motor cover screws.
Tighten: Tighten the screws to 2 N.m (18 lb in).
Install the wiper drive system module. Refer to Wiper Drive System Module Replacement .
Install the air inlet grille panel. Refer to Air Inlet Grille Panel Replacement in Body Front End.
Operate the windshield wipers and inspect for proper operation.