FixVault
Home › Pontiac › 2005 › Aztek Base, AWD › Repair and Diagnosis › External Pages › Different car › Section 35 (Wiper System & Washer System) › Repair Instructions › Wiper Motor Replacement › Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2004 Chevrolet Monte Carlo and 2004 Chevrolet Impala. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the air inlet grille panel. Refer to Air Inlet Grille Panel Replacement in Body Front End.
  2. Remove the wiper motor crank arm. Refer to Wiper Motor Crank Arm Replacement .
  3. Remove the wiper drive system module. Refer toWiper Drive System Module Replacement .
  4. Remove the wiper motor screws.
    5. Fig 1: Removing Wiper Motor Screws
    GM815221Courtesy of GENERAL MOTORS CORP.
  5. Remove the wiper motor from the wiper drive system module.
  6. Remove the shaft seal and the water shield from the wiper motor.
About FixVault