FixVault
Home › Pontiac › 2005 › Aztek Base, AWD › Repair and Diagnosis › External Pages › Different car › Section 41 (Power Steering System) › Repair Instructions › Power Steering Cooler Replacement › Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2004 Chevrolet Monte Carlo and 2004 Chevrolet Impala. However, it is still accessible from the selected car via links, so may be relevant.
  1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle in General Information.
  2. Place a drain pan under the vehicle.
  3. Remove the power steering cooler hoses from the power steering cooler.
  4. Remove the bolts from the power steering cooler.
  5. Remove the power steering cooler from the vehicle.
    6. Fig 1: Power Steering Cooler
    GM682324Courtesy of GENERAL MOTORS CORP.
About FixVault