Installation Procedure

WARNING: This page is about a different car, the 2004 Pontiac Grand Prix. However, it is still accessible from the selected car via links, so may be relevant.

Install the lamp/switch assembly (2) to the backplate.
Position the backplate (3) on the headliner.
Install the headliner harness connector (1) to the lamp/switch assembly (2).

Fig 1: Headliner Harness Electrical Connector, Lamp/Switch Assembly & Headliner

Courtesy of GENERAL MOTORS CORP.

Install the headliner. Refer to Headliner Replacement .
Install the plastic screw housings and loosely install the screws in the handle.

NOTE: Refer to Fastener Notice in Cautions and Notices.

Install the assist handle screws.
Tighten: Tighten the screws to 2 N.m (18 lb in).

Fig 2: Assist Handle Screws & Plastic Housings Using Screwdriver

Courtesy of GENERAL MOTORS CORP.

Slide the end covers into position and press up to install both end covers.
Install the lamp lens cover.

Fig 3: Installing Lamp Lens Cover

Courtesy of GENERAL MOTORS CORP.