FixVault
Home › Pontiac › 2005 › Aztek Base, AWD › Repair and Diagnosis › External Pages › Different car › Section 87 (Seat System) › Repair Instructions › Trim Panel Replacement - Front Seat › Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2004 Pontiac Grand Prix. However, it is still accessible from the selected car via links, so may be relevant.
  1. Position the front seat trim panel to the front seat.
  2. Connect the electrical connectors to the power seat switch (2) and lumbar switch (3).
    3. Fig 1: Power Front Seat Switch
    GM1230651Courtesy of GENERAL MOTORS CORP.
    NOTE: Refer to Fastener Notice in Cautions and Notices.
  3. Install the trim panel screws (1).

    Tighten:  Tighten the screws to 3 N.m (27 lb in).

    4. Fig 2: Front Seat Trim Panel Screws
    GM862962Courtesy of GENERAL MOTORS CORP.
  4. Install the retainer to the base of the recliner handle.
  5. Install the recliner handle.
  6. Install the seat belt anchor nut.

    Tighten:  Tighten the nut to 42 N.m (31 lb ft).

About FixVault