FixVault
Home › Pontiac › 2005 › Aztek Base, AWD › Repair and Diagnosis › Steering › Power Steering System › Repair Instructions › Power Steering Gear Heat Shield Replacement › Installation Procedure

Installation Procedure

    Fig 1: View Of Steering Gear Heat Shield & Mounting Bolts
    GM629007Courtesy of GENERAL MOTORS CORP.
  1. Install the steering gear heat shield.
    2. NOTE: Refer to Fastener Notice in Cautions and Notices.
  2. Install the steering gear heat shield bolts.

    Tighten:  Tighten the steering gear heat shield bolts to 14 N.m (124 lb in).

  3. Lower the vehicle.
About FixVault