FixVault
Home › Pontiac › 2005 › Aztek Base, AWD › Repair and Diagnosis › Transmission › Automatic Trans › Automatic Transaxle - Introduction & Repair Instructions › Repair Instructions › Forward Servo Replacement (M76 - AWD) › Installation Procedure

Installation Procedure

    Fig 1: View Of Forward Servo Assembly
    GM164777Courtesy of GENERAL MOTORS CORP.
  1. Install the servo spring.
  2. Install the servo piston assembly.
  3. Install the forward servo cover O-ring.
  4. Install the forward servo cover.
    5. NOTE: Refer to Fastener Notice in Cautions and Notices.
  5. Install the forward band servo cover bolts.

    Tighten:  Tighten the forward band servo cover bolts to 12 N.m (106 lb in).

  6. Install the transfer case. Refer to Transfer Case and/or Seal Replacement in Transfer Case - Steyr.
About FixVault