FixVault
Home › Pontiac › 2005 › Aztek Base, AWD › Repair and Diagnosis › Transmission › Automatic Trans › Automatic Transaxle - Introduction & Repair Instructions › Repair Instructions › Oil Pressure Test Plug Replacement › Removal Procedure

Removal Procedure

  1. Remove the throttle body air inlet duct. Refer to Air Cleaner Assembly Replacement in Engine Controls-3.4L.
    2. Fig 1: View Of Line Pressure Pipe Plug
    GM164784Courtesy of GENERAL MOTORS CORP.
  2. Remove the pressure test hole plug (38).
About FixVault