FixVault
Home › Pontiac › 2005 › Aztek Base, AWD › Repair and Diagnosis › Transmission › Automatic Trans › Automatic Transaxle - Introduction & Repair Instructions › Repair Instructions › Pressure Control Solenoid (PCS) Replacement › Installation Procedure

Installation Procedure

    Fig 1: View Of Pressure Control Solenoid (PCS) Assembly
    GM49378Courtesy of GENERAL MOTORS CORP.
  1. Install the pressure control solenoid (322).
  2. Connect the transaxle wiring harness.
  3. Install the case side cover. Refer to Case Side Cover Replacement .
About FixVault