FixVault
Home › Pontiac › 2005 › Aztek Base, AWD › Repair and Diagnosis › Transmission › Automatic Trans › Automatic Transaxle - Introduction & Repair Instructions › Repair Instructions › Torque Converter Clutch Pulse Width Modulation (TCC PWM) Solenoid Replacement › Installation Procedure

Installation Procedure

    Fig 1: View Of TCC PWM Solenoid
    GM49380Courtesy of GENERAL MOTORS CORP.
  1. Install the torque converter clutch PWM solenoid (334).
  2. Connect the transaxle wiring harness.
  3. Install the case side cover. Refer to Case Side Cover Replacement .
About FixVault