Transfer Case Assemble: Notes
Tools Required
- J 5590 Crankshaft Sprocket Installer
- J 8001 Dial Indicator Set. See Special Tools .
- J 36797-A Seal Installer. See Special Tools .
- J 44752 Bearing, Race, and Seal Installer. See Special Tools .
- J 44753 Bearing and Seal Installer. See Special Tools .
- J 44755 Holding Fixture. See Special Tools .
- J 44757 Shim Selection Kit. See Special Tools .
- J 44907 Bearing Installer. See Special Tools .
- J 44908 Bearing Race Installer. See Special Tools .
IMPORTANT:
- The transfer case is assembled for proper gear tooth clearances, backlash, and bearing preloads with selective shims.
- Do not assemble the internal components dry. Lightly lubricate the bearing races, bearings, gears, and oil seals with the proper lubricant. Components in the transaxle portion of the transfer case should be lubricated with DEXRON III GM P/N 12378470 (Canadian P/N 10952622) or equivalent. Components in the hypoid gear portion of the transfer case should be lubricated with GM P/N 12378514 (Canadian P/N 88901045).