Removal Procedure
Courtesy of GENERAL MOTORS CORP.
- Use a small flat-bladed tool to disengage the retainer clips located at the front and rear of the power sunroof switch. Hold the flat-bladed tool parallel to the roof and push straight in.
Courtesy of GENERAL MOTORS CORP.
- Rotate the power sunroof switch toward the left side to disengage the retainer clips from the mounting bracket and pull down.
Courtesy of GENERAL MOTORS CORP.
- Disconnect the electrical connector from the power sunroof switch.
Courtesy of GENERAL MOTORS CORP.
- Remove the power sunroof switch from the bezel.