FixVault

Removal Procedure

  1. Remove the trim panel. Refer to Trim Panel Replacement - Side Rear Door (Aztek)  or Trim Panel Replacement - Side Rear Door (Rendezvous) .
  2. Remove the water deflector. Refer to Water Deflector Replacement - Rear Door .
  3. Remove the inside handle rods from the rear door inside handle. Refer to Door Handle Replacement - Rear Inside .
  4. Fig 1: View Of Outside Door Handle Rod-To-Lock
    GM624645Courtesy of GENERAL MOTORS CORP.
  5. Disconnect the clip securing the outside handle rod to the rear door lock.
  6. Fig 2: Identifying Front Door Lock Screws
    GM624652Courtesy of GENERAL MOTORS CORP.
  7. Remove the screws from the rear door lock.
  8. Fig 3: Front Door Lock Electrical Connectors
    GM624661Courtesy of GENERAL MOTORS CORP.
  9. Disconnect the electrical connectors from the lock.
  10. Fig 4: View Of Door Lock With Inside Handle Rods
    GM624653Courtesy of GENERAL MOTORS CORP.
  11. Remove the lock from the rear door with the inside handle rods attached to the lock through the access hole in the inner panel.
  12. Fig 5: Identifying Inside Handle Rods
    GM624643Courtesy of GENERAL MOTORS CORP.
  13. Remove the inside handle rods from the lock.