FixVault
Home › Pontiac › 2005 › Aztek Base, FWD › Repair and Diagnosis › Engine Performance › System › Engine Controls - 3.4L - Introduction › Repair Instructions › Fuel Tank Pressure Sensor Replacement › Removal Procedure

Removal Procedure

  1. Remove the fuel tank. Refer to Fuel Tank Replacement .
    2. Fig 1: Identifying Fuel Tank Pressure Sensor
    GM682671Courtesy of GENERAL MOTORS CORP.
  2. Disconnect the electrical connector from the fuel tank vapor pressure sensor.
  3. Remove the fuel tank pressure sensor (1) from the modular fuel sender.
About FixVault