FixVault
Home › Pontiac › 2005 › Aztek Base, FWD › Repair and Diagnosis › External Pages › Different car › Section 41 (Power Steering System) › Repair Instructions › Power Steering Pulley Replacement › Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2004 Chevrolet Monte Carlo and 2004 Chevrolet Impala. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the power steering pump assembly from the vehicle. Refer to Power Steering Pump Replacement (3.4L)  or Power Steering Pump Replacement (3.8L) .
    2. Fig 1: Removing Power Steering Pump Assembly
    GM293353Courtesy of GENERAL MOTORS CORP.
  2. Using J 25034-C  remove the power steering pump pulley from the power steering pump. See Special Tools and Equipment .
About FixVault