FixVault
Home › Pontiac › 2005 › Bonneville SLE › Repair and Diagnosis (Single Page) › Accessories & Equipment › Communication Devices › Computer/Integrating Systems › Repair Instructions › Rear Integration Module Replacement › Installation Procedure

Installation Procedure

    Fig 1: View Of Push Pin Retainers, Rear Integration Module & Electrical Connectors
    GM492570Courtesy of GENERAL MOTORS CORP.
  1. Install the RIM to the vehicle.
  2. Connect the electrical connectors (3).
  3. Fasten the RIM (2) to the vehicle with the push pin retainers (1).
  4. Reposition the rear seat back insulator.
  5. Install the rear seat back. Refer to Seat Back Replacement - Rear in Seats.
  6. Install the rear seat belt buckle anchor bolts.
  7. Install the rear seat cushion. Refer to Seat Cushion Replacement - Rear in Seats.
  8. Reprogram the RIM. Refer to Body Control Module (BCM) Programming/RPO Configuration (IPM)  or Body Control Module (BCM) Programming/RPO Configuration (DIM)  or Body Control Module (BCM) Programming/RPO Configuration (RIM) .
About FixVault