PCM Replacement

If the powertrain control module (PCM) is replaced, the following procedures must be performed:

1. PCM Reprogramming - Refer to Service Programming System (SPS)  .
2. Crankshaft Position (CKP) Variation Learn - Refer to CKP System Variation Learn Procedure .
3. Engine Oil Life Remaining - When available, use a scan tool to reset the Engine Oil Life Remaining back to the original percentage recorded before the module was replaced.
4. Transmission Fluid Life Remaining - When available, use the scan tool to reset the Transmission Fluid Life Remaining back to the original percentage recorded before the module was replaced.
5. Theft Deterrent - Refer to Programming Theft Deterrent System Components .